Home | Compressors | Dryers | Parts, Oil And Filters | Accessories | Service | Forums | About | Contact

Nebraska Pneumatics Reciprocating Air Compressors 5-25 HP

Our product line offers high value and great performance, and in addition these units can be customNPI 7.5hp Reciprocating Compressor Built On a 120 Gallon Vertical Air Receiver configured to your requirements. Our machines are constructed with compressor pumps that are design based on the time proven Saylor-Beall line of compressors. These are heavy duty cast iron models that will give long service life with low unit maintenance. Some units are stocked but many are assembled in our shop to customer specifications.

   Standard Features:

  • Cast iron construction for long compressor life.

  • Centrifugal unloader for load less startup.

  • Large heavy duty inlet filter for clean operation.We Use High Quality Cast Iron Compressor Pumps For Our Brand Compressors.

  • Needle bearings installed on wrist pins.

  • ASME Code air receivers.

  • 200 psi rated safety valve installed.

  • Furnas brand pressure switch installed.

  • Wall mounted electric motor started included.

  • Your choice of horizontal or vertical air receiver on 5 and 7.5 HP models.

Optional Features:Belt Guard Mounted After Cooler Assembly.

  • Belt guard mounted Air Cooled After cooler.

  • Low oil level shutdown switch.Low Oil Level Shut Down Switch Assembly

  • Either electronic or pneumatic automatic condensate drain valve.

  • Continual run or start/stop operation.Pneumatic Receiver Drain Valve.

  • Your choice of open, TEFC or explosion proof motors

  • Inlet filter silencers for quiet operation.

 

Electric Motor Driven Compressors

HP NPI Model# CFM Disp. CFM 100PSI CFM 175PSI Tank Size GAL Cyls Comp RPM Volts/Phase Dimensions
(L x W x H in inches)
Weight (LBS.)
5 CI521E80V 23.1 19.6 18.2 80 2 760 230-1 78-26-32 600
5 CI521E80H 23.1 19.6 18.2 80 2 760 230-1 50-24-62 600
5 CI523E80V 23.1 19.6 18.2 80 2 760 208-230-460-3 78-26-32 600
5 CI523E80H 23.1 19.6 18.2 80 2 760 208-230-460-3 50-24-62 600
7.5 CI7521E120V 38.2 34.1 32.7 120 4 595 230-1 77-46-46 780
7.5 CI7521E120H 38.2 34.1 32.7 120 4 595 208-230-460-3 60-26-70 760
10 CI1023E120V 45.1 38.9 37.2 120 4 720 208-230-460-3 77-46-46 790
10 CI1023E120H 45.1 38.9 37.2 120 4 720 208-230-460-3 60-26-70 790
15 CI1523E120H 57.2 49.6 46.7 120 4 809 208-230-460-3 60-26-70 880
15 CI1523E120V 57.2 49.6 46.7 120 4 809 208-230-460-3 77-46-46 930
20 CI2023E120H 89.8 66.5 64.2 120 4 650 208-230-460-3 69-31-60 1800
25 CI2523E120H 106.5 81.5 78.6 120 4 775 208-230-460-3 69-31-60 1850
NOTE: The letters "V" or "H" at the end of the model# denotes the unit as horizontal or vertically tank mounted. Example: CI521E80V is a 5HP machine that is mounted on a horizontal air receiver. All  gasoline driven models are horizontally mounted.

Gas Engine Driven Compressors

11 CI11GEK30 25.9 21 19 30 2 809 Kohler 45-18-38 430
12.5 CI125GER-0-30 25.9 21 19 30 2 809 Onan 45-18-38 430
11 CI11GERH30 25.9 21 19 30 2 809 Honda 45-18-38 430

*Optional Equipment Available On All Electric Units

 

Home | Compressors | Dryers | Parts, Oil And Filters | Accessories | Service | Forums | About | Contact

Our website was last updated on  3/3/2009

Copyright © 2009  Nebraska Pneumatics, Inc.
All Rights Reserved.

Nebraska Pneumatics, Inc.
8718 Washington Circle
Omaha, NE 68127

Phone     402-339-6533
FAX        402-339-6516
Toll Free 888-579-6004
E Mail Us Today